Windows 10
is software just like its predecessors OS which need time to time update in order to work things out correctly. This is
not surprising for such a complex piece of software, so in this piece of write-up you will get a complete guide that
will help you get back up and run your Windows 10 PC accurately.
When you are
upgrading to Windows 10 from Windows 8.1 or Windows 7, you may face blue screen
death error BSOD. In general, this error code happens due to BIOS settings. In
some cases, the error could be due to corrupt
or damaged download of the installer. If you are not able to fix the issue
then, you can simply take reliable support from a third party support
proffering company that offers you customized support for blue screen error?
Blue Screen of Death while Booting
Windows 10
There are mainly
two things which are causing this issue while booting Windows 10. In the first
scenario, you can access your desktop while in the second, the Blue Screen of
Death won’t even let do work on your desktop and you are trapped within a loop
of computer restarts. For this, you can
take help from Windows 10 technical support for BSOD errors and the expert technicians help you in resolving the
error subsequently.
The main
reasons why BSOD appears are:
·
Some
of the Windows drivers are causing
conflict or
·
Some
Windows Update gone incorrect. If the latter is the reason, you have to
eliminate and obstruct the update that caused Blue Screen of Update.
Consequently,
the BSOD error message can be resolved in simple steps by just enabling UEFI
Boot from the BIOS and disabling all other
selection for the processor.
Here is how
you do it:
·
First
of all, go to C drive : > Windows > Software Distribution > Download
and delete all the files stored in this folder.
·
As
the Windows Update method seems to be a bit disordered due to inherent bugs in
the OS, it is advisable to try performing a clean install of Windows 10 by
downloading the ISO files from Microsoft's official website. After downloading
the ISO file, you need to create a bootable installation media via Microsoft's
Media Creation tool.
·
You
can proceed further by correcting a few settings in the BIOS menu once you have
prepared the bootable USB drive or DVD.
·
Restart
your computer and once the display appears, quickly click the F12 or Delete key
to bring up the BIOS menu.
·
Switch
off all other options for your processor,
if you have set it higher than default values.
·
Turn
on UEFI Boot from the BIOS, which can be found in
the Boot section of the BIOS screen.
·
Just
reboot the PC via installation media you created earlier and the Windows 10
upgrade should complete without any hassles.
For further
details visit the Microsoft Windows official website and get more relevant
solutions.
No comments:
Post a Comment